Aluminium lifting spreader beam

Aluminium lifting spreader beam description

The spreader beam is an intermediate lifting accessory positioned between a hoist and a load. It enables the load to be hooked up, guaranteeing optimum stability and reduced headroom. Their single-beam, H-shaped or X-beam structure can be either fixed or adjustable. The aluminium design drastically saves weight compared to steel spreaders beams.

Wide-flange parallel beam (HEB), Wide-flange beam (HEA), European I-Beam (IPE), U-beam, the beams of the steel spreaders are equipped with one or more lifting rings or lugs that allow the load to be hooked directly or by slings. The load is balanced by adjusting the slings’ precise positioning in relation to the centre of gravity of the load.

The multi-purpose spreader beams can be equipped with an inclinometer embedded in the beam (optional) in order to guide precisely the operator when preparing the handling.

Aluminium monobeam spreader with fixed hooks

Fixed monobeam spreader is a single beam structure equipped with fixed anchorage points. The use of a spreader beam decreases the inherent headroom in a traditional slinging device. We can design and manufacture custom-made spreaders and integrate options such as specific hooks dedicated to a single type of load.

Aluminium monobeam spreader with adjustable hooks

Adjustable aluminium monobeam spreaders allow to adjust the length centre distance between the lower hooks in order to suit the length of the load to be lifted. The secured step-by-step adjustment ensures safe lifting with optimised load balancing.

Aluminium H-shaped spreader beam with fixed hooks

The typical structure of fixed H-shaped steel spreaders has a main beam on which stand two secondary beams. That kind of spreader beam is suitable for rectangular loads lifting. In order to ensure a high level of safety, the assembly of the H-shaped spreader beams is guaranteed without any load-bearing welds. 

Aluminium H-shaped spreader beam with adjustable hooks

The special characteristic of the adjustable H-shaped spreaders is to have variable length beams. This type of versatile spreader benefits lifting both rectangular and square loads. The length of each arm adjustment has a safety notching device. 

Aluminium X-shape spreader beam

X-shape spreader beams are exclusively intended for lifting cubic or square loads. Our range of standard X-shape spreaders beams covers the most current requirements such as big bag spreaders.

 Aluminium spreader beams options

• Inclinometer
• ROLLIX X-shape rotating system allowing an automatic adjustment of the X-beam

Conformity

Our spreader beams are provided with a CE conformity Certificate.